The PS Audio Digital Link III is the kind of DAC that reminds you digital audio doesn't have to sound like digital audio. Built around a fully discrete, zero-feedback analog output stage — no op-amps, no shortcuts — it has a warmth and organic ease that reviewers at the time kept reaching for the word 'analog' to describe. There's genuine body to voices and instruments, a spacious, almost unnervingly dimensional soundstage, and a bass register with real weight and grip. It won't out-resolve a modern converter, and its USB input is very much a product of its era, but via coaxial or Toslink it still holds its ground in ways that surprise people. One of the more charming sleepers of the late-2000s DAC era — and increasingly easy to find for not much money.
Production
2006-2012
Condition
Cosmetic 9.5/10 - Electronic 10/10
Serial No.
DL3-B1-10C-176
Orig. MSRP
$995
Restoration
- Verified front lights and buttons
- Tested coax, optical and usb inputs
Factory Specs
DAC Chip Texas Instruments (formerly Burr-Brown) PCM1798DB, 24-bit/192kHz Sigma-Delta, differential current outputs, 8× oversampling digital filter
Input Receiver Cirrus Logic CS8416, 24-bit/192kHz, low-jitter clock recovery, supports 8 digital inputs
Sample Rate Converter Texas Instruments SRC4192 (asynchronous), upsamples all inputs to 96kHz or 192kHz (user-selectable); no bypass mode implemented
USB Codec Texas Instruments PCM2902 (USB 1.1); maximum supported input: 16-bit/48kHz via standard USB Audio class driver
Upsampling Rates 96kHz or 192kHz (front-panel selectable); no 44.1kHz/bypass mode
Dynamic Range (rated, chip) 123 dB
THD (rated, chip level) 0.0005%
THD+N (measured, system, 1kHz, 0dBFS into 100kΩ) 0.0239%
THD+N (measured, system, 50Hz, 0dBFS into 100kΩ) 0.0224%
Unbalanced Output Voltage (measured, 0dBFS) ~2.75V RMS (L: 2.736V, R: 2.759V) — approximately +2.8dB above Red Book 2.0V standard
Balanced Output Voltage (measured, 0dBFS) ~5.5V RMS (L: 5.485V, R: 5.530V)
Output Impedance (measured) ~99Ω (RCA unbalanced); ~196Ω (XLR balanced)
Absolute Polarity Inverted at both RCA and XLR outputs (positive-going digital signal appears negative-going at analog output)
DC Offset (measured) 2.7mV
Output Stage Topology Fully discrete, zero-feedback, Class A; single-transistor I/V conversion (no op-amps); passive first-order filter; FET input / bipolar gain & output stage; DC-coupled throughout
Noise Floor (measured, relative to 2V RMS) -87dB unweighted; -96dB A-weighted
Channel Separation (measured) -127dB at 10kHz
Frequency Response (rated) 10Hz–20,000Hz, ±0.1dB
Frequency Response Rolloff (measured, 44.1kHz input data) -0.40dB at 20kHz
Digital Inputs 3 total: S/PDIF Coaxial (RCA); Optical (Toslink); USB Type B (computer audio)
Input Selection Front-panel button cycles through inputs; AutoScan mode auto-selects first active signal (default); press-and-hold to disable AutoScan
Analog Outputs RCA stereo pair (unbalanced); XLR stereo pair (balanced, Neutrik gold-contact connectors)
Transformer 32VA toroidal
Filter Capacitors Four 12,000µF electrolytic capacitors (48,000µF total)
Rectifiers Vishay/GI UF5404 high-speed, soft-recovery diodes
Voltage Regulators 7815/7915 (analog supplies); 7805CT & 78M33C (digital); two LM317 (local analog output regulation)
Dimensions 8.46" W × 2.56" H × 14.17" D (215 × 65 × 360mm)
Weight 11 lbs (5 kg)
Form Factor Half-width 'Micro' chassis (approximately half the width of a standard full-size hi-fi component)
Power Connection Standard IEC inlet; power switch on rear panel
Liner Notes
Warm, open and spacious are words not typically associated with digital audio. But PS Audio's new Digital Link III outboard DAC helps any digitally recorded medium sound just like that, with a top end that will remind you of analog -- and performance that may make an SACD player unnecessary. The DLIII is a killer DAC featuring the latest balanced D to A converter, the TI PCM1798DB. This new generation of 192 kHz processors from Texas Instruments (formerly Burr Brown) features 24-bit resolution and 123 dB dynamic performance. Its rated THD is just 0.0005%. The DLIII comes with differential outputs and an eight times oversampling filter, too.
Shipping
This piece ships to the contiguous United States for a flat rate of $25, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
Stock No.
15520947863773