Quicksilver's reputation is well-earned, yet they manage to exceed expectations time and time again. Their new KT Mono Amp is one of the most powerful, affordable, and sonically pure amplifiers on the market today. Right out of the box, this pair delivers 80 watts per channel, but they are compatible with a variety of output tubes - drop in some KT150's and open 'em up to 100W. The KT Mono is the clearest, most holographic amplifier quicksilver has ever made, and perhaps ever will. If you're near Denver, we invite you to audition them in our showroom, with a wide variety of new and vintage loudspeakers. We think you'll understand why we love them so much.
The Aural Walnut Edition matches a pair of the clear, yet powerful KT Mono amps with Quicksilver's Line Preamplifier, each presented in the beauty and warmth of walnut. Designed and handcrafted by Aural, these exclusive solid walnut faceplates are laser cut and etched, with the fit and finish you've come to expect from Aural. Available exclusively here.
- Specs
Type Stereo tube amplifier
Power Output 80 watts into 4 or 8Ω (KT88)
Tube Complement 2x KT88, 1x 12AX7, 1x 12BH7
Power Bandwidth 14 Hz to 70 KHz
Damping Factor 20
Input Sensitivity 1.2 volts
Input Impedance 100 Kohm
I.M. Distortion: < 0.5% at 80 watts
Compatibile Output Tubes KT66, KT77, KT88, KT90, KT99, KT120, KT150 (+20W), and KT170
Power Consumption 100 watts at idle 240 watts at full power
Dimensions 6"H x 9.25"W x 14.5"D
Weight 40 lbs. ea.
US Warranty 3 years parts and labor & 90 days for tubes
- Documentation
Quicksilver Audio KT Mono Amp Owner's Manual
- The History of Quicksilver Audio
- Quicksilver Audio entered the high-end audio market in 1981 when we began selling the MS190 Stereo Amplifier. Mike Sanders, the founder and owner of Quicksilver Audio, has been an avid audiophile since his early teen years. He went on to earn his Electrical Engineering baccalaureate degree from the University of the Pa...
[ Read More ]
- Liner Notes
The new KT Mono amp retains the high damping factor and low distortion of the Horn Mono but with enough power to handle inefficient and difficult to drive speakers. The amplifier accepts KT66, KT77, KT88, KT90, KT99, KT120, KT150, and KT170 power tubes and when ordered with KT150s will produce 100 watts. It also has low distortion all the way up to full power but at reduced power gives the efficiency, finesse and delicacy of a low powered amplifier.
- Packing
- We'll deliver this piece in its original factory box, so you can be sure it will be protected just as Quicksilver Audio intended.
- Shipping
- This piece ships to the contiguous United States for a flat rate of $150, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
- Stock No.
- 7953726046429
Quicksilver's reputation is well-earned, yet they manage to exceed expectations time and time again. Their new KT Mono Amp is one of the most powerful, affordable, and sonically pure amplifiers on the market today. Right out of the box, this pair delivers 80 watts per channel, but they are compatible with a variety of output tubes - drop in some KT150's and open 'em up to 100W. The KT Mono is the clearest, most holographic amplifier quicksilver has ever made, and perhaps ever will. If you're near Denver, we invite you to audition them in our showroom, with a wide variety of new and vintage loudspeakers. We think you'll understand why we love them so much.
The Aural Walnut Edition matches a pair of the clear, yet powerful KT Mono amps with Quicksilver's Line Preamplifier, each presented in the beauty and warmth of walnut. Designed and handcrafted by Aural, these exclusive solid walnut faceplates are laser cut and etched, with the fit and finish you've come to expect from Aural. Available exclusively here.
Specs
Type Stereo tube amplifier
Power Output 80 watts into 4 or 8Ω (KT88)
Tube Complement 2x KT88, 1x 12AX7, 1x 12BH7
Power Bandwidth 14 Hz to 70 KHz
Damping Factor 20
Input Sensitivity 1.2 volts
Input Impedance 100 Kohm
I.M. Distortion: < 0.5% at 80 watts
Compatibile Output Tubes KT66, KT77, KT88, KT90, KT99, KT120, KT150 (+20W), and KT170
Power Consumption 100 watts at idle 240 watts at full power
Dimensions 6"H x 9.25"W x 14.5"D
Weight 40 lbs. ea.
US Warranty 3 years parts and labor & 90 days for tubes
Documentation
Quicksilver Audio KT Mono Amp Owner's Manual
The History of Quicksilver Audio
Quicksilver Audio entered the high-end audio market in 1981 when we began selling the MS190 Stereo Amplifier. Mike Sanders, the founder and owner of Quicksilver Audio, has been an avid audiophile since his early teen years. He went on to earn his Electrical Engineering baccalaureate degree from the University of the Pa...
[ Read More ]
Liner Notes
The new KT Mono amp retains the high damping factor and low distortion of the Horn Mono but with enough power to handle inefficient and difficult to drive speakers. The amplifier accepts KT66, KT77, KT88, KT90, KT99, KT120, KT150, and KT170 power tubes and when ordered with KT150s will produce 100 watts. It also has low distortion all the way up to full power but at reduced power gives the efficiency, finesse and delicacy of a low powered amplifier.
Packing
We'll deliver this piece in its original factory box, so you can be sure it will be protected just as Quicksilver Audio intended.
Shipping
This piece ships to the contiguous United States for a flat rate of $150, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
Stock No.
7953726046429
